DEV Community

#cnc

Posts

đź‘‹ Sign in for the ability to sort posts by relevant, latest, or top.
Why Seal Surfaces Leak While the Ra Number Looks Fine

Why Seal Surfaces Leak While the Ra Number Looks Fine

Comments
3 min read
How to Turn a Photo into a 16-bit Depth Map and STL for 3D Printing, Laser Engraving, and CNC

How to Turn a Photo into a 16-bit Depth Map and STL for 3D Printing, Laser Engraving, and CNC

Comments
6 min read
How to Calculate Laser Kerf and Material Thickness for Press-Fit Finger Joints

How to Calculate Laser Kerf and Material Thickness for Press-Fit Finger Joints

Comments
3 min read
Six Checks Before You Send a Drawing to a New Chinese Machine Shop

Six Checks Before You Send a Drawing to a New Chinese Machine Shop

Comments 1
4 min read
How Many Shops Should You Quote? The Math Behind 2 vs 5

How Many Shops Should You Quote? The Math Behind 2 vs 5

Comments 1
4 min read
Reading a CMM Report: What the Numbers Actually Tell You

Reading a CMM Report: What the Numbers Actually Tell You

Comments
5 min read
Thread Milling vs Tapping vs Rolling: What Actually Changes in the Quote

Thread Milling vs Tapping vs Rolling: What Actually Changes in the Quote

Comments
4 min read
304 vs 316 vs 17-4 PH: what actually changes in a stainless quote

304 vs 316 vs 17-4 PH: what actually changes in a stainless quote

Comments 1
4 min read
Anodized Aluminum Parts: The Dimensions, the Color, and the Callout Nobody Writes

Anodized Aluminum Parts: The Dimensions, the Color, and the Callout Nobody Writes

Comments 1
6 min read
0.005 mm: When a Tight Tolerance Actually Matters, and When ISO 2768-m Is Enough

0.005 mm: When a Tight Tolerance Actually Matters, and When ISO 2768-m Is Enough

Comments
3 min read
A 0.5 mm Wall Doesn't Move While You Cut It: Notes From Filming a 4-Axis Aluminum Job

A 0.5 mm Wall Doesn't Move While You Cut It: Notes From Filming a 4-Axis Aluminum Job

Comments
4 min read
CNC Aluminum Parts: What Actually Changes Between 200 Pieces and 10,000

CNC Aluminum Parts: What Actually Changes Between 200 Pieces and 10,000

Comments 1
3 min read
What Your 40 / 1,000 / 10,000-Piece Order Actually Tests in a Chinese 5-Axis Shop

What Your 40 / 1,000 / 10,000-Piece Order Actually Tests in a Chinese 5-Axis Shop

Comments 1
3 min read
Guide Bushings Explained: Why Swiss-Type Lathes Hold Tolerances on Long, Thin Parts

Guide Bushings Explained: Why Swiss-Type Lathes Hold Tolerances on Long, Thin Parts

Comments 1
5 min read
CNC Machining Time Explained: Why Your Actual Cycle Time Is Longer Than the Calculation

CNC Machining Time Explained: Why Your Actual Cycle Time Is Longer Than the Calculation

Comments
14 min read
đź‘‹ Sign in for the ability to sort posts by relevant, latest, or top.